EVE-NG LAB HUB

‹ 浏览实验

置顶 HCS_L3 layers 精选

官方(管理员发布) 华为 · 数据中心 · v1 更新于 2026-11-18 · 全部版本(1)

这个实验解决什么问题

华为HCS_L3 layers

能不能跑
设备 48 台(不含 VPC)许可档位:需授权 — 设备超过 7 台(不含 VPC),需要 EVE-NG 授权;导入不受限,启动第 8 个设备时才会被拦
要准备什么
模板:docker、eve-gui-server、huaweiar6700、huaweice6800_YunShan、huaweine8000、huaweis5700、huaweiusg6000f_e镜像:eve-gui-server:latest、huaweiar6700-V600R025C10SPC100-v1.2、huaweice6800_YunShan-V300R025C10SPC500-v1.2、huaweine8000-V800R025C10SPC500-v1.2、huaweis5700-V200R001C00-v1.3、huaweiusg6000f_e-V600R025C10SPC100-v1.2可用接口 208 个
占多大
CPU 64 核内存 128 GB(解析值:CPU 84 核 / 内存 156 GB,贡献者可改成实际需要的)解析值取自 .unl 里节点的最大分配,只是上限;实际需要多少以人工填写为准。镜像体积需自备,本站不镜像分发
怎么看
配置集 1 个 / 配置 48 份过滤器 14 条拓扑图见「拓扑」选项卡

实验所需镜像

模板镜像节点数量
dockereve-gui-server:latest2
eve-gui-servereve-gui-server:latest9
huaweiar6700huaweiar6700-V600R025C10SPC100-v1.25
huaweice6800_YunShanhuaweice6800_YunShan-V300R025C10SPC500-v1.218
huaweine8000huaweine8000-V800R025C10SPC500-v1.28
huaweis5700huaweis5700-V200R001C00-v1.31
huaweiusg6000f_ehuaweiusg6000f_e-V600R025C10SPC100-v1.25
物理拓扑 · physical-8F79C8AA4EB5.png · 新窗口打开
HCS_L3 layers 物理拓扑

物理拓扑一个版本只有一张,换图请先删掉旧的那张再上传。

没有逻辑拓扑图(这一项是可选的)。需要的话在后台「传拓扑图」里选视角「逻辑拓扑」,可以传多张。

逻辑拓扑可以有任意多张,按上传顺序展示。

这个实验还没有实验手册。上传者可以在后台「实验手册」里按需求 / 解法 / 案例三段补充。

在 EVE-NG 的 Filters 里新增一条,把下面这条 filter 贴进去即可。点右侧按钮复制(标题 + 表达式)。

  • 1_VPC-Peering_request
    ((icmp and src host 10.18.1.10 and dst host 10.18.2.10) or (ip and udp port 4789 and ether[76:4] == 0x0A12010A and ether[80:4] == 0x0A12020A)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 10.18.1.10 and dst host 10.18.2.10) or (ether[14:2] & 0xfff == 12 and icmp and src host 10.18.1.10 and dst host 10.18.2.10) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x0a12010a and ether[84:4] == 0x0a12020a and ether[77] == 1)))
  • 1_VPC-peering_reply
    ((icmp and src host 10.18.2.10 and dst host 10.18.1.10) or (ip and udp port 4789 and ether[76:4] == 0x0A12020A and ether[80:4] == 0x0A12010A)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 10.18.2.10 and dst host 10.18.1.10) or (ether[14:2] & 0xfff == 12 and icmp and src host 10.18.2.10 and dst host 10.18.1.10) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x0a12020a and ether[84:4] == 0x0a12010a and ether[77] == 1)))
  • 2_EIP_request
    ((icmp and src host 89.1.1.1) or (ip and udp port 4789 and ether[76:4] == 0x59010101)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 89.1.1.1) or (ether[14:2] & 0xfff == 12 and icmp and src host 89.1.1.1) or (ether[14:2] & 0xfff == 13 and icmp and src host 89.1.1.1) or (ether[14:2] & 0xfff == 200 and icmp and src host 89.1.1.1) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x59010101 and ether[77] == 1)))
  • 2_EIP_reply
    ((icmp and dst host 89.1.1.1) or (ip and udp port 4789 and ether[80:4] == 0x59010101)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and dst host 89.1.1.1) or (ether[14:2] & 0xfff == 12 and icmp and dst host 89.1.1.1) or (ether[14:2] & 0xfff == 13 and icmp and dst host 89.1.1.1) or (ether[14:2] & 0xfff == 200 and icmp and src host 89.1.1.1) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[84:4] == 0x59010101 and ether[77] == 1)))
  • 3_INAT_request
    ((icmp and dst host 8.8.8.8) or (ip and udp port 4789 and ether[80:4] == 0x08080808)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and dst host 8.8.8.8) or (ether[14:2] & 0xfff == 12 and icmp and dst host 8.8.8.8) or (ether[14:2] & 0xfff == 13 and icmp and dst host 8.8.8.8) or (ether[14:2] & 0xfff == 100 and icmp and dst host 8.8.8.8) or (ether[14:2] & 0xfff == 102 and icmp and dst host 8.8.8.8) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[84:4] == 0x08080808 and ether[77] == 1)))
  • 3_INAT_reply
    ((icmp and src host 8.8.8.8) or (ip and udp port 4789 and ether[76:4] == 0x08080808)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 8.8.8.8) or (ether[14:2] & 0xfff == 12 and icmp and src host 8.8.8.8) or (ether[14:2] & 0xfff == 13 and icmp and src host 8.8.8.8) or (ether[14:2] & 0xfff == 100 and icmp and src host 8.8.8.8) or (ether[14:2] & 0xfff == 102 and icmp and src host 8.8.8.8) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x08080808 and ether[77] == 1)))
  • 4_ELB_FTP_request
    ((icmp and src host 88.1.1.10) or (ip and udp port 4789 and ether[76:4] == 0x5801010A)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 88.1.1.10) or (ether[14:2] & 0xfff == 12 and icmp and src host 88.1.1.10) or (ether[14:2] & 0xfff == 13 and icmp and src host 88.1.1.10) or (ether[14:2] & 0xfff == 200 and icmp and src host 88.1.1.10) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x5801010a and ether[77] == 1)))
  • 4_ELB_FTP_reply
    ((icmp and dst host 88.1.1.10) or (ip and udp port 4789 and ether[80:4] == 0x5801010A)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and dst host 88.1.1.10) or (ether[14:2] & 0xfff == 12 and icmp and dst host 88.1.1.10) or (ether[14:2] & 0xfff == 13 and icmp and dst host 88.1.1.10) or (ether[14:2] & 0xfff == 200 and icmp and dst host 88.1.1.10) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[84:4] == 0x5801010a and ether[77] == 1)))
  • 4_ELB_HTTP_request
    ((icmp and dst host 10.18.4.10) or (icmp and dst host 10.18.5.10) or (icmp and src host 88.1.1.20) or (ip and udp port 4789 and ether[76:4] == 0x58010114) or (ip and udp port 4789 and ether[76:4] == 0xAC13670A) or (ip and udp port 4789 and ether[80:4] == 0x0A12040A) or (ip and udp port 4789 and ether[80:4] == 0x0A12050A)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 88.1.1.20) or (ether[14:2] & 0xfff == 12 and icmp and src host 88.1.1.20) or (ether[14:2] & 0xfff == 13 and icmp and src host 88.1.1.20) or (ether[14:2] & 0xfff == 200 and icmp and src host 88.1.1.20) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[84:4] == 0x0a12040a and ether[77] == 1) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[84:4] == 0x0a12050a and ether[77] == 1)))
  • 4-ELB_HTTP_reply
    ((icmp and src host 10.18.4.10) or (icmp and src host 10.18.5.10) or (icmp and dst host 88.1.1.20) or (ip and udp port 4789 and ether[80:4] == 0x58010114) or (ip and udp port 4789 and ether[80:4] == 0xAC13670A) or (ip and udp port 4789 and ether[76:4] == 0x0A12040A) or (ip and udp port 4789 and ether[76:4] == 0x0A12050A)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and dst host 88.1.1.20) or (ether[14:2] & 0xfff == 12 and icmp and dst host 88.1.1.20) or (ether[14:2] & 0xfff == 13 and icmp and dst host 88.1.1.20) or (ether[14:2] & 0xfff == 200 and icmp and dst host 88.1.1.20) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x0a12040a and ether[77] == 1) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x0a12050a and ether[77] == 1)))
  • 6_strong_request
    ((icmp and src host 10.18.2.10 and dst host 99.1.1.1) or (ip and udp port 4789 and ether[76:4] == 0x0A12020A and ether[80:4] == 0x63010101)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 10.18.2.10 and dst host 99.1.1.1) or (ether[14:2] & 0xfff == 12 and icmp and src host 10.18.2.10 and dst host 99.1.1.1) or (ether[14:2] & 0xfff == 14 and icmp and src host 10.18.2.10 and dst host 99.1.1.1) or (ether[14:2] & 0xfff == 15 and icmp and src host 10.18.2.10 and dst host 99.1.1.1) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x0a12020a and ether[84:4] == 0x63010101 and ether[77] == 1)))
  • 6_strong_reply
    ((icmp and src host 99.1.1.1 and dst host 10.18.2.10) or (ip and udp port 4789 and ether[76:4] == 0x63010101 and ether[80:4] == 0x0A12020A)) or (vlan and ((ether[14:2] & 0xfff == 11 and icmp and src host 99.1.1.1 and dst host 10.18.2.10) or (ether[14:2] & 0xfff == 12 and icmp and src host 99.1.1.1 and dst host 10.18.2.10) or (ether[14:2] & 0xfff == 14 and icmp and src host 99.1.1.1 and dst host 10.18.2.10) or (ether[14:2] & 0xfff == 15 and icmp and src host 99.1.1.1 and dst host 10.18.2.10) or (ether[14:2] & 0xfff == 4000 and udp port 4789 and ether[80:4] == 0x63010101 and ether[84:4] == 0x0a12020a and ether[77] == 1)))
  • 7_bms_request
    ((icmp and src host 10.18.6.10 and dst host 10.18.7.10) or (ip and udp port 4789 and ether[76:4] == 0x0A12060A and ether[80:4] == 0x0A12070A)) or (vlan and ((ether[14:2] & 0xfff == 13 and icmp and src host 10.18.6.10 and dst host 10.18.7.10) or (ether[14:2] & 0xfff == 17 and icmp and src host 10.18.6.10 and dst host 10.18.7.10)))
  • 7_bmc_reply
    ((icmp and src host 10.18.7.10 and dst host 10.18.6.10) or (ip and udp port 4789 and ether[76:4] == 0x0A12070A and ether[80:4] == 0x0A12060A)) or (vlan and ((ether[14:2] & 0xfff == 13 and icmp and src host 10.18.7.10 and dst host 10.18.6.10) or (ether[14:2] & 0xfff == 17 and icmp and src host 10.18.7.10 and dst host 10.18.6.10)))

还没有备注。